The SPR A-TACS comes with LWRCI’s new Skirmish Sights. These sights can be raised using gross motor skills and without pressing any button. The sights lock in the up position and are lowered by pressing a button on their left sides. The sights are extremely low profile and stand less than ½” tall when folded. All of the sharp edges have been smoothly radiused, nearly eliminating the possibility of snagging the folded sights or cutting the shooters hands when being deployed. The sights are constructed of 7075 aluminum, which is Type 3 hardcoat anodized, and 4140 steel, that is treated with a NiCorr surface conversion technology. 7075 aluminum is much harder and stronger than the 6000 series aluminum used in our competitor’s sights. The bearings and detents are all industrial hard chromed. The sights are nearly impervious to corrosion. As an added benefit, all of the surfaces on the rear of the sights post and its protective wings are grooved at either 20 or 40 lines per inch to eliminate glare.

For more information on the SPR, or to place a pre-order, visit their website at: www.northwesttactical.us.com

A-TACS AU CAMO DECORATED FURNITURE KITS FROM NORTHWEST TACTICAL

To add A-TACS Camo to your existing weapon platform, Northwest Tactical offers a variety of A-TACS CAMO Furniture options, including  Magpul ACS stocks(mil-spec), Magpul Miad grips in a varity of configurations, LWRCI Railskin Rail covers, Handguards and 30 round P-mags. For specifics, visit them online at: www.northwesttactical.us.com

The answer was found in the creation of an entirely new pattern based on the A-TACS Camo’s unique “pattern within a pattern” concept. The addition of simulated depth was also necessary in order to add visual disruption to further break up the human silhouette.

After over a year of development and input of countless tactical professionals, we are proud to introduce A-TACS FG (Foliage/Green) Camo. Utilizing numerous shades of green sampled directly from a variety of forested and transitional terrain elements combined with various shades of earth, A-TACS FG Camo was developed to be effective in a wide range of temperate environments. As with the original A-TACS AU (Arid/Urban) Camo pattern, the organic pixels in the micro patterns are grouped into larger, more defined “macro” shapes creating larger more defined patterns. The larger organic shapes and strategically placed shadow elements within the macro pattern help to create a unique three-dimensional effect never before seen in a tactical concealment system.

Following this announcement in the coming weeks, we will post more photos as well as updates on specific A-TACS FG Camo gear being offered by our manufacturing partners in addition to specific information regarding product availability.

A-TACS FG Camo gear in photos provided by, Propper (ACUs and Boonies) Tactical Assault Gear (Plate Carriers and Pouches), Blue Force Gear (Weapon Slings) Grey Ghost (Plate Carriers and Pouches) Beez Combat Systems (Plate Carriers), Danner (Boots)

The Mamba Suit in A-TACS Camo

The Mamba offers the operator full body concealment. The Mamba is combat proven and the “King of Choice”. It is built from scratch and constructed from the highest quality materials and highest performance fabrics available. Ultra lightweight and strong as nails, the Mamba is provided un-garnished allowing the operator to garnish it as best suited for their operating environment. Superior design and quality workmanship attribute to its popularity with military special operation teams.
Features include:
- Closed-Chest System, Side entry via Fastex buckles along side of Blouse.
- Removable & Thickness Adjustable Padding on: Elbows, Forearms, Chest, Knees
- 1000 Denier Nylon Skid Protection
- Nylon 550 Nylon Cord for Garnish Attach (Tighter grid work for more effective foliage attach).
- Adjustable Hand Loops
- Blouse is upgradeable to accommodate Tactical Concealment’s Adjustable Sniper Hood.
- Adjustable Foot Stirrups
- One-Size-Fits-All Sleeve Length via Wrist Tension Cords.
- One-Size-Fits-All Leg Length via Ankle Tension Cords
- Adjustable Egress Suspension System (Crotch Strap) via Fastex Buckle
- MOLLE Webbing integrated on each trouser leg to accomodate your own custom gear-pocket.
- Reinforced seat and Crotch using Cordura®
- Entire back of shirt is ventilated with a Flame Retardant Mesh fabric.
- Reinforced Trouser Fly Snap
- 2″ Wide Duty Belt, Fully Waist Adjustable

The Cobra Suit in A-TACS Camo
The Cobra system base garment is designed to be worn in conjunction and work in unison with combat loadout equipment including LBV’s, Assault Vests and slim line backpack systems. The operator is now able to achieve the camouflage/concealment effectiveness a sniper has in a ghillie suit but scaled into a package that is practically suited toward the working needs and style of an assaulter. The Cobra is suited for LP/OP, Reconnaissance/Intelligence Gathering, Ranging, Forward Observation, Dismounted Patrol, Ambush Line and Target Beaconing. One size fits most.
Features include:
- One-Size-Fits-All, Adjustable chest tension straps, hood cinching cords.
- Nylon Cord is bar-tacked throughout entire outer shell to accommodate the use of jute or foliage.
- Fabric and Nylon Ventilation Mesh construction equals weightlessness and durability making the system comfortable and non-restrictive.

The Viper Hood in A-TACS Camo
The GhillieSkins Viper Hood is new high-speed low-profile and lightweight garment designed not just for snipers but for any operator who can benefit from having an edge toward visual based camouflage/concealment. Specific to this type of operator is that like the Cobra, this garment is also designed to be worn in conjunction and work in unison with combat loadout equipment including LBV’s, Assault Vests and Backpack systems. The Viper Hood is also well suited for LP/OP, Reconnaissance/Intelligence Gathering, Ranging, Forward Observation, Dismounted Patrol, Ambush Line and Target Beaconing. One size fits most.
Features Include:
- Easy to wear design distorts critical factor “Head & Shoulders”
- Modular design, easily convert garment toward mission specifics
- Weighs less than 1 lb
- Easily stow into BDU pant cargo pocket when not in use.
- Wear over head, hat or helmet

The Sidewinder Chest Skid Plate in A-TACS Camo
Designed to provide an operator a smooth unobstructed chest skid surface to conduct effective sniper low crawls. Additionally it provides much needed comfort and reduces physiological degradation often found against harsh ground surfaces and temperate conditions. The one piece skid plate is constructed from 1000 denier Cordura nylon. Adjustable straps transverse the wearers waist and back allow for adjustment for different size operators. Quick employment and exit of the garment are performed behalf 1-inch ITW Nexus buckles. An inner liner hosts a side entry pocket for document and map storage and allows the operator to adjust the level of chest padding. A 1-inch webbing egress crotch strap keeps the SideWinder from riding-up during reverse crawls. Combine the SideWinder Chest Skid plate with Tactical Concealment’s Viper or Cobra upper garments along with the Armadillo leg chaps and you will have a completely modular sniper garment suited for a wide variety of tactical applications.

Sniper Boonie Hat in A-TACS Camo
The Snipers Boonie is designed to address the critical factor of head and shoulder concealment, One size fits most. Features include:
- Entire crown of hat is ventilated with nylon mesh. Mesh is tucked in-between fabric to ensure no pinching against the
skull occurs
- Outer portion of brim has 550 cord tacked in place for foilage or jute attachment.
- Oversized netting allows user trim length to their preference.

Law Enforcement or Military Personnel, for additional information on these products, visit them online at www.tacticalconcealment.com or, contact them by e-mail at: dinora@tacticalconcealment.com.

Now available in A-TACS Camo, Beez Combat Systems introduces a tactical replacement carrier that converts the IOTV (Improved Outer Tactical Vest) GenI and GenII soft armor inserts into a improved tactical vest. The new carrier design allows the individual to convert the issue soft and hard body armor into a lighter and simpler body armor carrier system. The IOTV carrier was designed to provide the  maximum amount of ballistic protection and increase range of motion for the upper body. The IOTV carrier also has attachment webbing for IOTV issue attachments; yoke assembly, groin protector,throat protector and DAPS. The IOTV carrier allows proper adjustment of front and back hard plates. The carrier has an internal elastic cumber and an external cumber.The carrier is made out of cordura, which is very abrasion resistant. Internal front and back plate pockets support SAPI plates. BCS IOTV size dimensions are the same as the issue IOTV body armor dimension. Look for more A-TACS Camo gear from Beez Combat Systems to be announced soon. For more info, visit them online at: www.beezcombatsystems.com

More Gear = More Options

From plate carriers and chest rigs, to all manner of utility and specialty pouches, bags and packs, some of TPC’s A-TACS Nylon product offerings include…

Plate Carriers in A-TACS – Cut from 1000D Nylon Cordura, Molle compatible with integrated drag handle, plate compartments and A-TACS printed loop. Can be integrated and worn with optional A-TACS Recon Belt.

Chest Rigs in A-TACS – Cut from 1000D Nylon Cordura and featuring 4 triple M4 mag pouch with 2 large pockets that can accommodate M249′s box magazines and padded lining and straps.

Hydration Carriers in A-TACS – Cut from 1000D Nylon Cordura and featuring insulated lining and slot for inserting hydration tube. Molle Compatible.

Molle-Compatible Utility and Mag Pouches in A-TACS – Cut from 1000D Nylon Cordura

Universal Drop-Leg Holster in A-TACS – Cut from 1000D Nylon Cordura featuring an integrated mag storage pouch and is easily adjustable to fit a variety of weapon sizes.

Recon Belt in A-TACS – Cut from 1000D Nylon Cordura featuring Four (4) D-Rings for harness attachment & 2 D-Rings (under) for lanyard, Removable pad with extra mesh, Two (2) Leg Rig attachment openings and 2″” 2 ply PP TAPE BELT is included.

Clothing, Outerwear and Accessories

ARMA Dimension Jacket in A-TACS – Cut from 50/50 NYCO Ripstop and lined with Polyester Mesh, YKK Inverted Zippers, removable hood, A-TACS printed loop on shoulder pockets, Reinforced 2 ply sleeves and elbows, 2 large pockets in front, 2 pockets in each sleeve and 2 pockets in back, Adjustable cuffs with A-TACS printed loop closures.

Assault Force Jacket in A-TACS – Cut from 50/50 NYCO Ripstop and featuring a mandarin-style collar, full front zipper/hook and loop closure, reinforced elbows, six pockets including (2) shoulder, (4) front chest with hook and loop closure, shoulder pockets feature A-TACS printed loop for total concealment.

TCS Combat Shirt in A-TACS – Sleeves and Collar are cut from 50/50 NYCO Ripstop and the body is cut from 100 percent cotton, Pockets on sleeve feature A-TACS printed loop for rank, flag or unit patches.

Assault Force Trousers in A-TACS – Cut from 50/50 NYCO Ripstop and featuring 10 pockets including two large cargo pockets, double reinforced knee and seat, extra-wide belt loop with two D-rings and button closure.

ARMA Dimension Trousers in A-TACS – Cut from 50/50 NYCO Ripstop and featuring innovative Body contour multi panel construction for functionality, reinforced knee and seat and 10 pockets with hook and loop closures.

Shooters Cap in A-TACS – Cut from 50/50 NYCO Ripstop and featuring 1″ SQ LOOP on top & back for IR patch & 1″ loop on back for ID patch, etc. and Underbrim receptive material for VisorLites™

Snipers Boonie Cap in A-TACS – Cut from 50/50 NYCO Ripstop and featuring A-TACS fabric webbing and a ragged brim for specialized sniper applications.

Mitch Helmet Cover in A-TACS – Cut from 50/50 NYCO Ripstop.

For additional information on these and other TPC products in A-TACS, or to purchase, visit them at www.store.tactical-performance.com

With the relative success of the introductory products, they began to turn their attention to other types of gear. They noticed that many plate carriers in service had some fundamental weaknesses, so they set out to make improvements.  C2RMOR is the result, and while it has distinct operational and durability benefits, there are side benefits for equipment planners.  During the initial research and development phase of the program, they came across many ex-servicemen who are suffering back problems from the weights they were required to carry in the field.  As a result, they decided to adapt their plate carriers to incorporate a load distribution system to transfer weight from the shoulders to the hips without compromising the ability of soldiers to move naturally.
c2RMOR LITE followed the original C2RMOR platform as a clean-fatigue design for use in more covert applications.  They kept the design flexibility concept, but instead of being able to configure the base plate carriers as in the C2RMOR, the LITE allows for a clean, simple way to add pouches or reconfigure the unit for different operational needs.

C2RMOR Modular Plate Carrier

The C2RMOR modular plate carrier is easily configurable for a wide range of missions – from full on CT and Urban to parachute options. Lightweight cumberbunds are also available for this model.  To eject the inner plates, simply pull the two quick-release tabs on the front plate carrier
The corner pieces, are normally fitted with level III soft armour to give a stand-off from the body For the main hard plates – so a plate stop becomes an option.  Also, the arrangement creates an air gap that allows cool air to circulate.

C2RMOR Lite

The C2RMOR Lite features a detachable AMMO pouch on the front to leave a clean fatigue style vest.  Side pockets are integrated into the A-TACS printed elastic to allow for additional magazine storage.  The back panel can be easily mated to their hydration pocket which is built around a source 2LPS water carrier.
C2RMOR LITE is designed to be a clean fatigue, lower profile vest for carrying a system stop plate arrangement.  The absence of gear loops on the side strapping is deliberate to maintain the narrow design and allow more ease of movement.

Both the C2RMOR and C2RMOR Lite systems are available in A-TACS along with the TacPad and other innovative accessories. For more information, visit them online at www.c2rfast.com